Chainsaw PartsGas Chainsaws

How To Replace Fuel Line On Pioneer P28 Chainsaw? **2022

The PIONEER P28 Chainsaw is a powerful tool that comes with various features to meet various user needs.

The fuel line is an important part of any chainsaw and is responsible for sending the necessary gas to the motor. When the fuel line is defective, it could result in a weak spool or a rough start. If your PIONEER P28 is not starting, or if it is starting with a sputter, then it is likely that the fuel line is the culprit. Fortunately, it is relatively easy to replace on your own. The steps below will guide you through the process.

Basic Tools You’ll Need

  • Small Screwdriver
  • Socket Wrench
  • Pliers
  • Fuel Line Spooler
  • Ratchet Wrench
  • Jumper Wires
  • Wire Cutters
  • New Fuel Line
  • New Spark Plug
  • New Magnet Wire
  • New Air Filter
  • New Fuel Filter

Remove The Screws And Gently Pull Out The Old Fuel Line

First, remove the screws holding the front handle, side handle, and the rubber grip. Next, pull out the old fuel line. Be gentle as you do not want to tear it.

Pioneer P28

Install The New Fuel Line

Now, inspect the fuel line for damage or cracks. If there are no issues, wrap the new fuel line around the saw and snap it into place. If there are issues, get the appropriate tools to fix the issues. You might need a fuel line spooler to help you unwrap the new line. Then, push the line into the saw while holding it with the spooler. You might need a vice or other holder to hold the saw steady. Once in place, snap the line into place using the spooler.

Check The Trigger Guard And Replace it If Necessary

Before starting the chain, make sure that the trigger guard is on the saw. If it is not, then the trigger will hit the table when in use. Before checking the fuel line, make sure that it is in place. If it is not, then remove it. Next, remove the side handle on the saw and remove the trigger guard. Then, inspect the fuel line and make sure that it is in good condition. If there are cracks, then it is time to replace the fuel line.

Replace The Spark Plug

Next, replace the spark plug. Place it in the spark plug hole and then screw the spark plug into place. Make sure that it is secure. Next, attach the spark plug wires to the wires on the engine. Then, attach them to the plug on the engine.

Make Sure The Firing Mechanism Is Checked

Before starting the chain, make sure that everything is in place. First, make sure that the carburetor is on the engine. Then, make sure that the kickback and chute are on the saw.

Conclusion

If you followed the steps carefully, your fuel line issue will be fixed. Make sure that you have a working knowledge of your saw and its parts so you can troubleshoot any issues that may arise in the future. The PIONEER P28 Chainsaw is a powerful tool that comes with various features to meet various user needs. The fuel line is an important part of any chainsaw and is responsible for sending the necessary gas to the motor. When the fuel line is defective, it could result in a weak spool or a rough start. If your PIONEER P28 is not starting, or if it is starting with a sputter, then it is likely that the fuel line is the culprit. Fortunately, it is relatively easy to replace on your own. The steps below will guide you through the process.

FAQ

If your PIONEER P28 is not starting, or if it is starting with a sputter, then it is likely that the fuel line is the culprit.

Related Articles

Back to top button