Disclosure: As an Amazon Associate, we earn from qualifying purchases.

Disclosure: As an Amazon Associate, we earn from qualifying purchases.

When firewood piles build up and mature timber needs felling, light-duty home chainsaws quickly show their limitations. The Stihl MS 391 steps into this gap as a heavy-duty Farm & Ranch chainsaw designed to tackle dense hardwoods, storm cleanup, and long bucking sessions without breaking the bank. Built around a high-torque engine chassis, this saw delivers raw cutting force that rivals professional saws while maintaining an approachable price point for landowners, farmers, and severe duty outdoor workers.

Quick answer: Retailing around $839.99, the Stihl MS 391 pairs a 64.1 cc 2-MIX engine generating 4.4 horsepower with a sturdy 13.8-pound powerhead, making it an exceptional heavy-duty choice for cutting several cords of firewood or processing large logs.

STIHL MS 391 Technical Specifications & Engine Engineering

To understand where the STIHL MS 391 fits into your wood-cutting arsenal, you first need to look under the shroud. The engine features STIHL's proprietary 2-MIX technology, a 2-stroke engine design that uses a stratified charge system. A layer of clean air sits between the fresh charge in the crankcase and the burned gas in the combustion chamber. This air cushion reduces the amount of unburned fuel lost during the exhaust cycle, boosting fuel efficiency by up to 20% and reducing exhaust emissions by up to 50% compared to traditional non-stratified 2-stroke engines. The MS 391 utilizes a classic engine-on-chassis design rather than the split magnesium crankcase found on STIHL’s full professional series. While this adds a tiny bit of dead weight, it allows STIHL to offer a massive 64.1 cc engine displacement at a price point substantially lower than true forestry-grade logging saws. The built-in pre-separation air filtration system spins air as it enters, flinging heavy sawdust particles outward before air ever touches the primary filter. This setup dramatically extends maintenance intervals, letting you run through multiple tanks of gas without stopping to tap out dirty filter elements.
SpecificationSTIHL MS 391 Specs
Engine Displacement64.1 cc
Engine Power (STIHL 391 HP)4.4 HP (3.3 kW)
Fuel Capacity600 ml
Oil Tank Capacity325 ml
STIHL 391 Weight6.2 kg (13.67 lbs)
Bar Length Options16” / 18” / 20” / 25”
Chain Pitch3/8”
Power-to-Weight Ratio1.4 kg per kW
Sound Pressure Level105 dB(A)

Maximize Your STIHL MS 391: Chains, Bars & Sharpeners

A 64cc powerhouse demands premium cutting gear. Keep your MS 391 tearing through hardwood with exact-fit Oregon 3/8" professional chains and maintain razor-sharp teeth on the job with the STIHL 2-in-1 Easy File Guide (3/8" standard pitch). Explore compatible bars and chains on Amazon.
Below is the complete technical specification overview for the STIHL MS 391 chainsaw, detailing core dimensions, engine outputs, and setup parameters:
Specification Parameter STIHL MS 391 Technical Data
Engine Displacement 64.1 cc (3.9 cu. in.)
Power Output 3.3 kW / 4.4 bhp
Powerhead Weight (Dry) 6.2 kg / 13.8 lbs
Power-to-Weight Ratio 3.1 lbs / hp (1.9 kg/kW)
Recommended guide bar Lengths 16 inch to 25 inch (40 cm to 63 cm)
Standard Chain Pitch / Gauge 3/8" Pitch, .050" or .063" Gauge
Fuel Tank Capacity 20.3 oz (600 cc / 0.60 L)
Chain Oil Capacity 11.2 oz (330 cc)
Fuel Mixture Ratio 50:1 (Unleaded gasoline 89+ octane to 2-stroke oil)
These specifications highlight why the MS 391 excels at continuous bucking work. With 4.4 horsepower available at the clutch drum, the saw maintains high chain speed even when buried in 18-inch white oak or hickory logs.

Cutting Performance, Bar Options, and Real-World Handling

Running a 64.1 cc engine requires a solid frame and thoughtful design features so the operator stays comfortable throughout a full day in the woods. STIHL equips the MS 391 with an advanced rubber buffer anti-vibration system. By isolating the engine and cutting attachment from the front and rear handles, handle vibration is kept around 4.0 m/s², significantly reducing hand fatigue and the risk of long-term nerve irritation.
Choosing the proper guide bar setup makes a massive difference in how the MS 391 performs:
  • 18-inch Bar (45 cm): The ultimate balance for maneuverability and blistering chain speed. Ideal for limbing large fallen trees and standard firewood bucking.
  • 20-inch Bar (50 cm): The sweet spot for most MS 391 owners. It allows you to buck 36-inch logs with a two-pass cut without bending over as far, while keeping excellent balance.
  • 25-inch Bar (63 cm): Supported for occasional large tree felling or softwoods. While it will pull a 25-inch full-house 3/8" chain through soft pine, cutting speed slows down noticeable in green, dense hardwoods like red oak or sugar maple.
For optimal chain setup, run a 3/8" pitch STIHL Rapid Micro (RM) semi-chisel chain for general property cleanup and dusty timber, or a Rapid Super (RS) full-chisel chain for maximum cutting speed in clean hardwood timber. Always pair the saw with correct Personal Protective Equipment (PPE), including cut-retardant chainsaw chaps (ASTM F1897 standard), a hard hat with integrated mesh visor and 25+ NRR ear muffs, eye protection, and leather work gloves.

STIHL MS 391 Field Review and Practical Maintenance

In real-world use, the MS 391 operates like a dependable tractor. It starts predictably, cuts with authoritative low-end torque, and forgives minor operator errors better than high-strung race-tuned pro saws. Starting is made easy thanks to the integrated decompression valve, which bleeds off a portion of the cylinder compression during the pull, cutting the starter rope pull resistance almost in half.

Pro tip: When breaking in a new MS 391, the drive chain will stretch noticeably during the first two tanks of fuel. Always re-tension the chain after every 15 minutes of cutting during initial use, and never tighten a hot chain flush to the bar bottom, as it will shrink as it cools and damage the crankshaft bearings or sprocket nose.

Pro-Grade 64cc Heavyweight Rival: Husqvarna 465 Rancher II

In the heavy-duty rancher class, the Husqvarna 465 Rancher II is the primary head-to-head competitor to the Stihl MS 391. Driven by a 64.1cc engine equipped with AutoTune electronic engine management, it delivers aggressive torque and automatic altitude compensation, effortlessly pulling a 20-inch guide bar through dense hardwood timber.
RegionSTIHL 391 Price Range
USA$699 – $799 USD
UK£600 – £700
AustraliaAUD $1,250 – $1,400
India₹60,000 – ₹80,000
Europe (EUR)€750 – €850
Like all high-powered gas equipment, keeping your saw running smoothly depends on routine maintenance. Here is how to diagnose and resolve common field issues on the MS 391:
  1. Engine Hard Starting or Flooding: If pulling the cord on full choke more than 3-4 times without a pop, you may flood the engine. Flip the lever to semi-choke, press the decompression valve, hold the throttle wide open with your right boot in the rear handle, and pull until it fires. Always use fresh, ethanol-free gasoline mixed at 50:1 with quality STIHL 2-cycle oil.
  2. Loss of High-RPM Power Under Load: A clogged air filter or dirty fuel pickup screen restricts flow. Clean the air filter by tapping it out gently and washing it in warm, soapy water; inspect the fuel filter inside the tank and swap it annually.
  3. Inadequate Chain Lubrication: The MS 391 features an adjustable Ematic oil pump. Turn the oiler screw on the bottom of the crankcase clockwise to increase oil output when running a 20-inch or 25-inch guide bar or working in dry, pitchy wood. Clean the bar groove clear of packed sawdust every time you sharpen the chain.

STIHL MS 391 vs MS 362: Head-to-Head Comparison

One of the most common dilemmas for buyers stepping up to a 60 cc class saw is deciding between the Farm & Ranch MS 391 and the Professional-series MS 362 C-M. While both powerheads pull similar-sized bars and handle similar tasks, they are engineered for different usage profiles. The MS 391 uses heavier engine castings and standard mechanical carburetion, making it economical and simple. The MS 362 C-M features a professional magnesium crankcase, lighter internal moving parts, higher peak working RPM, and STIHL's electronic M-Tronic engine management, which automatically adjusts fuel metering on the fly.
Feature / Spec STIHL MS 391 (Farm & Ranch)
Classification Heavy-Duty Farm & Ranch / Landowner
Engine Displacement 64.1 cc
Horsepower Output 4.4 bhp
Powerhead Weight 13.8 lbs (6.2 kg)
Engine Construction Polymer engine-on-chassis
Engine Management Standard mechanical carburetor
Average Price Point ~$839.99

Precision Workshop Grinding: Oregon 511AX Electric Bench Grinder

Filing a high-torque 64cc chainsaw chain by hand after bucking dirty firewood can cause uneven cutter angles and excessive bar wear. The Oregon 511AX bench-mounted grinder features a digital indexing vice and precise cutter templates to restore exact top-plate angles across 3/8" chains, ensuring your MS 391 slices through oak logs like brand new.
If you cut 5 to 15 cords of firewood a year or maintain a farm property, the MS 391 delivers all the grunt you need while saving roughly $200-$300 compared to the pro saw. However, if you clear timber daily, carry a saw all day long, or demand maximum powerhead speed, the lighter professional chassis of the MS 362 C-M justifies its higher price tag. If you manage a large rural acreage, clear storm damage regularly, or harvest several cords of dense hardwood each winter, purchase the STIHL MS 391 outfitted with a 20-inch guide bar and a 3/8" pitch chain. To get started, head to your local authorized STIHL dealer to test the balance of the saw in hand, pick up a double-pack of STIHL HP Ultra 2-stroke oil to double your factory engine warranty, and pick up a pair of protective chaps before your first cutting project.

Frequently Asked Questions

What size bar comes standard on the STIHL MS 391?

Authorized STIHL dealers typically stock the MS 391 paired with either an 18-inch or 20-inch STIHL Rollomatic E guide bar, which offers optimal balance and cutting performance for this engine size.

What is the fuel mixture ratio for the STIHL MS 391?

The STIHL MS 391 requires a 50:1 mixture ratio of unleaded gasoline (minimum 89 octane with no more than 10% ethanol) to high-quality 2-stroke air-cooled engine oil.

Can the STIHL MS 391 pull a 25-inch guide bar effectively?

Kevlar-Reinforced Leg Armor: Husqvarna Technical Chainsaw Chaps

Operating a high-power 64.1cc powerhead without specialized leg protection poses critical safety risks. These Husqvarna Technical apron wrap chaps feature multi-layered Kevlar and high-tenacity polyester fibers designed to jam the drive sprocket and freeze a running chain instantly upon contact, certified to rigorous UL and OSHA standards.

Yes, the 64.1 cc engine produces enough torque to handle a 25-inch guide bar for occasional felling or bucking. However, for daily operation in hard woods, an 18-inch or 20-inch bar maintains faster chain speed and better powerhead balance.

Sources

FeatureSTIHL MS 391STIHL MS 362
Engine Displacement64.1 cc59.0 cc
Power Output4.4 HP4.6 HP
Weight6.2 kg5.8 kg
Technology2-MIXM-Tronic (electronic carburetion)
Best UseFarm & RanchProfessional Forestry
PriceSlightly LowerSlightly Higher

Looking for the Right Gear?

Check out our verified Top Professional Chainsaws & Safety Gear Essentials on Amazon.

As an Amazon Associate, we earn from qualifying purchases.