How To Build A Chainsaw Chain?

Cut the links.

It’s easy to see why chainsaws are so popular. They’re fast, efficient, and powerful. And they make cutting wood much easier than using an ax. However, there’s more to building a chainsaw chain than just making sure it fits properly.

Add the pins.

First, you need to add the pins to the links. This will keep them from moving when you use the saw. Next, you need to cut off the ends of the links. Then, you need to file down any sharp edges. Finally, you need to attach the pins to the links with rivets.

Attach the pin ends.

Once you’re done cutting the links, you need to attach them to the pins. Start by placing one link on top of another. Then, place the pin end through both holes. Repeat until you have enough links attached to the pins.

Test it out!

Now that you have your chain ready, test it out with some wood. If you find any issues, you can fix them before you start using them.

Start with a piece of steel wire.

First, take a piece of steel wire and wrap it around the teeth of the saw blade. This will help keep the teeth aligned as you cut through the wood. Next, use a pair of pliers to bend the ends of the wire into hooks. Finally, attach the hook to the end of the chain by wrapping it around the chain links.

  • Greenworks Chainsaw Uses for Homeowners

    5 Greenworks Chainsaw Uses for Homeowners ✔️

    GreenWorks chainsaws are made for cutting wood, branches, and brush. They’re also great for pruning shrubs and hedges. Here are…

    Read More »
  • Weed Eater's coil to the chainsaw --

    How to change a Weed Eater’s coil to the chainsaw?

    Both tools perform almost the same task, which is to maintain the lawn. However, there are several important differences between…

    Read More »
  • 455 Rancher Saw Cover

    How to Rebuild 455 Rancher Saw Cover? **Review

    The design was first introduced in the 1950s and has been used by a number of different manufacturers ever since.…

    Read More »
  • Mower Blade

    Which Brand of Mower Blade is Best? | Top 3 Brands to Compare **2022

    Mower blades are one of the most important parts of your lawnmower and it is also one of the more…

    Read More »
  • Pole Saw Blade

    How to Sharpen a Pole Saw Blade: 7 Tips for Sharpening Your Blades

    Sharpening a pole saw blade requires a few simple steps. Follow these tips to get your blade back in fighting…

    Read More »
  • Chassis on a Chainsaw

    10 Things You Need To Know About Chassis on a Chainsaw: The Basics

    The system saves users time by removing the need to switch between tools, and it also makes certain jobs safer…

    Read More »
  • Husqvarna 450x Bar And Chain Combo

    What Can I Put On My Husqvarna 450x Turbo Chainsaw For A Bar And Chain Combo

    The Husqvarna 450X chainsaw is a powerful and innovative piece of machinery that you can use to keep the family…

    Read More »
  • Husqvarna bar and chain oil

    How to Change Motor Oil in a 440 Husqvarna Chainsaw?

    A 440 Husqvarna chainsaw is a good choice for homeowners looking for a powerful and affordable tool. The model has…

    Read More »
  • Husqvarna 235 E

    What is the Largest Bar I Can Use on Husqvarna 235 E Series?

    Husqvarna chains are interchangeable. This means you can use the same bars on different models. For example, if you own…

    Read More »
  • 36in Bar From a Stihl 661 on a 3120 Husqvarna

    Can you use a 36in bar from a Stihl 661 on a 3120 Husqvarna?

    The answer to this question is “yes”. You can use a 36in a bar from a STIHL 661 on a…

    Read More »
  • FAQ

    It’s easy to see why chainsaws are so popular. They’re fast, efficient, and powerful.

    First, you need to add the pins to the links. This will keep them from moving when you use the saw. Next, you need to cut off the ends of the links. Then, you need to file down any sharp edges. Finally, you need to attach the pins to the links with rivets.

    Once you’re done cutting the links, you need to attach them to the pins.

    If you find any issues, you can fix them before you start using them.

    First, take a piece of steel wire and wrap it around the teeth of the saw blade. This will help keep the teeth aligned as you cut through the wood.


Back to top button