36in Bar From a Stihl 661 on a 3120 Husqvarna

The answer to this question is “yes”. You can use a 36in a bar from a STIHL 661 and 3120 Husqvarna. To do so, you need to modify the tail of the Stihl chainsaw. To do this, you need to make the mounting slot wider and drill new holes. You will need a milling machine or drill press to make this modification. Below are the different combinations of bars and their compatible features.

36in Bar From a Stihl 661 on a 3120 Husqvarna

The Stihl 661 and Husqvarna 3120 are both professional-grade chainsaws used for heavy-duty tasks such as cutting down trees, chopping firewood, and clearing fallen branches.

The Stihl 661 is a powerful saw equipped with a high-performance engine and advanced features such as the “Quick Chain Tensioning” system for easy chain adjustment, and an anti-vibration system for comfortable use during extended periods of operation.

The Husqvarna 3120 XP is also a heavy-duty saw designed for professional use, with features like low vibration, efficient air filtering, and a quick-release air filter cover for easy cleaning and maintenance. It also has an X-Torq engine that reduces emissions and fuel consumption, making it more environmentally friendly.

Ultimately, the choice between the two models may come down to personal preference and the specific needs of the user.

Compare Two Models STIHL 661 and 3120 Husqvarna

If you’re comparing the two models, you’ll notice that the Stihl chainsaw has a wider guide bar than the Husqvarna chainsaw. The Husqvarna guide bar is wider than the Stihl chainsaw. The Husqvarna guide bars can fit on both models of STIHL 661.

If you have a smaller model of the Stihl, you can use the 36in a bar form that you saw on your 3120 Husqvarna. However, if you’re using a bigger one, you can use a larger one from a STIHL. The larger Stihl bar will fit, and the smaller one won’t.

Adapt the guide bar for your Husqvarna

The Husqvarna and Stihl guides are different. The STIHL guide bar is wider than the one on the Husqvarna. If you’re looking to use the guide bar from a Stihl, you’ll need to adapt the guide bar on your Husqvarna. You can also make an adapter plate for the bar.

You can use a 36in a bar from a STIHL 661 on a 3120 Husqvarna. The same goes for a 33in a bar from a Stihl 650. A 32 bar from a STIHL can work on the 3120XP. If you find it fits, it will check.

If you want to install a longer bar, you must modify the chain. It would be best to consider the STIHL 3120XP chainsaw with a 36 bar. A STIHL 661 bar is made for a smaller engine. If you’re going to use a shorter one, you should change the mounting studs on your Stihl model.

The mounting slot on the Stihl is wider than the hole on the Husqvarna Small. So, the question becomes, can you use a 36in a bar from STIHL 661 and 3120 Husqvarna?? Absolutely! But it would help if you were careful not to put a 36in a bar on a small-sized Husqvarna.

FAQ

The answer to this question is - yes.

Similar Posts